How to use a Band Saw

A lot of people do use a Band saw in order to fix and attach stuffs. Well, there are a lot of people who believe that a band saw is probably the best instrument to get in order to attach screws and other things to a wood.

Well, if you are planning to buy a band saw to complete the DIY tasks sin your home with some wood work, then you may first know how to properly use a Band Saw. Here are some of the key steps that you may follow.

Step 1:

The first thing that you need to do is to clean the band saw and then get it dust free. Well, before the startup, you should always keep it in your mind to let the start of a new work with a clean saw. Thai will give you a fresh start to everything that you are with.

Step 2:

Most of the people tend to saw with the band saw with the same blade which they have used earlier. However this is just not done at all and one needs to use fresh blades or the blades with the appropriate sizes which are required to cut the arc.

More tools : 

Step 3:

One of the most important things that you need to figure out is the blade tension. The blade tension should never be left high because it will cause different issues in cutting the arc. Sometimes, because of the tension the blade cuts a bit more than what you need. So it can be naturally disturbing.

Step 4:

The next thing that you need to focus on is the blade guides which are liable to keep the blade level in the palace. Well, you now have to make sure that the guides are relatively closer to your needs. So what you need to do is to follow the proper blade guides.

Step 5:

One of the most important things that you need to know is how to apply a blade guard. Now the blade guard must be closer to the wood so that you can cut it protected and also while cutting the blade will not get exposed. Thus it is important for you to maintain an appropriate level for the cut.

Step 6:

One of the key things that you need to focus on is to plug in the Band saw and then get started with it. However once you have completed with the cuts and the edges, it is the time for you to assemble the saw and get it cleaned. Always remember to clean the band saw before you get started and then pack it up. Now you again have to clean up the saw dust and also the dust on the new steps.


Thus all that you have to do is to follow these steps and then get started with the using the band saw perfectly. So what you need to is to use the band saw is just what you would look forward to.

Leave a Reply

Your email address will not be published. Required fields are marked *